Как использовать Multi-Screen для создания видеостены 1x3 (1 строка, 3 столбца)?

In many projects, we often encounter scenarios where multiple groups of screens are spliced into a large screen, such as in security monitoring, e-sports/simulated driving, exhibitions, etc. You may be curious: how is this achieved? What equipment is used? How can clarity be ensured and image distortion avoided? Next, we will use an actual "subway triple-screen" case to reveal the mystery.

Seeing this photo, some people might say, wouldn't a 1-to-3 splitter solve the problem?

Of course, a splitter can be used to join these three screens into one, but it cannot guarantee the resolution of issues like image distortion and low clarity. For this project, we still need to consider the following three points:

 1. Signal synchronization: to avoid screen tearing or lag.

2. Resolution adaptation: the total resolution may be as high as 5760×1080 (3×1920×1080).

 3. Equipment compatibility: matching the graphics card, cables, and controller.

The following is our recommended solution.

Solution 1:

Equipment: BIT-MSE-4K60-103HD 

Computer configuration: dedicated graphics card GTX1060 or higher.

If the transmission distance is long, you can add a network extender (within 150 meters) or a fiber-optic extender (over 150 meters).

Solution 2:

Equipment: BIT-VJ-104 

With built-in 64G storage space and a video decoder, you can directly upload video/image content to the device for playback without an external input source.

The above two solutions are available for you to choose from. If you have other requirements, please contact us.